Name: Smoked Chuck Roast
Prep time: 15 min
Cook time: 480 min
Total time: 315 min
Ingredients: 5 pound beef chuck roast ((3 to 5 pound)); 1 tablespoon salt; 2 teaspoons black pepper; ½ teaspoon cayenne pepper ((use less if you do not like spicy food)); 1 teaspoon oregano; ½ teaspoon chili powder; 2 teaspoons garlic powder

Jump to Recipe Pin Recipe

Smoked chuck roast is cheaper than prime rib, easier to get along with than brisket, and easier to come by in the grocery store.

hand holding dripping meat over cutting board

A smoked chuck roast would be a great way to impress guests at your holiday party. Besides the fact that it’s a little different from ordinary holiday meats, beef chuck is cheaper than prime rib or beef tenderloin, easier to get along with than brisket, and is a lot easier to come by in the grocery store.

Follow our guide to take ordinary pot roast to a new level by smoking it like a brisket!

What is A Chuck Roast?

A chuck roast is a cut of beef from the cow’s shoulder. This cut of meat has superb marbling. However, chuck comes from the exercised shoulder area of the cow; it can be tough if not cooked properly. A chuck roast benefits from slow cooking to break down the tough connective tissue of the meat, making it fall apart tender and flavorful. It’s perfect for slow cooking, making it ideal for placing on your grill or smoker.

What You’ll Need To Smoke A Chuck Roast

Meat: Beef chuck roasts can range from 2-5 pounds. You should plan on feeding a half pound of meat per adult guest and a quarter pound per child. Of course, just in case, having an extra pound of meat is always a good idea.
Select a roast with a bright, white marbling of fat throughout the meat. Fat is the key to the meat’s tenderness, juiciness, and flavor.

Butcher’s Twine: A raw chuck roast is floppy, and the intramuscular fat and connective tissue are the only things holding the meat together. When you cook the roast, the fat, and tissues melt. We recommend tying the meat up with butcher’s twine to hold the meat together and make it easier to transfer the meat to the cutting board when it is done. You can find Butcher’s Twine on Amazon HERE.

Beef Rub: Use a beef rub to help you achieve a “flavorful bark” on the surface of the meat. Many use a mixture of kosher salt, black pepper, and garlic. You can use your favorite brisket rub or make our recipe found HERE.

Grill or Smoker: David smoked chuck roasts on his Weber Kettle charcoal grill and his Weber Smokey Mountain Cooker. You should follow the same principles and treat the chuck roast like a brisket, no matter what grill or smoker you use.

Charcoal: if using a charcoal grill, then you’ll need charcoal. We recommend using a charcoal chimney to get it hot.

Wood: use wood chunks or wood chips to smoke your roast. Chuck roast is like a brisket, and it takes on smoke well. We recommend Mesquite. Other options include post oak, pecan, hickory, or cherry wood.

Water Pan: we highly recommend placing a water pan underneath the meat to help stabilize and maintain your cooking temperature.

probing the meat on the smoker with thermometer

Meat Thermometer: Use a probe thermometer and/or an instant-read thermometer

Wrapping: You will need heavy-duty aluminum foil or butcher paper to wrap the meat once you get the desired bark. (Keep reading to find out what that is.)

How to Smoke A Chuck Roast

Here’s a basic overview of our smoked chuck roast recipe. The recipe card at the end of this post provides detailed instructions with times and temperatures.

#1 Prepare the Chuck Roast for Smoking

You’ll want to tie up the meat before rubbing it so you don’t knock off the rub while trussing it.

Truss The Meat: Secure chuck roast with 1 to 2 pieces of twine tied around the circumference of the meat and 3 to 4 pieces going around the width at 1 to 1 ½ inch intervals, making a grid pattern with the twine.

Rub The Meat: Rub the beef rub onto the chuck roast on all sides.
If making homemade beef rub, combine all the ingredients in a small bowl; stir with a whisk to mix and remove clumps. – Learn more about rubs HERE!

prepared chuck roast on board with wood chunks

#2 Prepare the Grill or Smoker

If using wood chips, soak a few handfuls for about 30 minutes in water before placing them on the coals.
Preheat the smoker or charcoal grill to 250 degrees F. Use only half as much charcoal as usual to maintain this low temperature. (A half chimney-full.)
If using a charcoal grill, set it up for indirect heat using a 3-zone split fire with a drip pan of water directly underneath the meat to help maintain and stabilize the temperature. A disposable pan is great for this grill setup.

#3 Smoking the Chuck Roast

When the coals are ready to cook, place the prepared chuck roast onto the center of the hot grate, over the drip pan filled with water, and insert temperature probes (if using).

Toss a few dry wood chunks or a handful of soaked wood chips onto the hot coals; cover and allow the beef to smoke. David uses dry wood chunks. The dry wood chunks provide a quick, intense smoke that increases the heat.

Bring the temperature up to 225-250 degrees F, using the grill or smoker vents, charcoal, and wood to regulate the temperature. You will need to add fresh coals and more wood almost every hour for at least the first 3-4 hours.

#4 Low and Slow Smoke

Check the smoker’s hourly temperature, staying as close to 225-250 degrees F as possible. Resist the temptation to open the lid unless you need to add more charcoal or wood to maintain temperature and smoke.

Wrapping the Smoked Chuck Roast

Smoke the chuck roast until a nice dark mahogany “bark” (outside crust) forms. At this point, the meat’s internal temperature is usually between 165-180 degrees F.

Remove the meat and wrap it tightly in heavy-duty aluminum foil or pink butcher paper. Then return the wrapped meat to the pit. Reinsert the temperature probe to help monitor the temperature. At this point, you do not need to add any more wood to the coals.

Wrapping the meat will stop the chuck roast from taking on any more smoke flavor, and it also allows you to stoke up the heat to finish the cook. It also helps with tenderness.

#5 Testing For Doneness

Once the meat is wrapped and placed over indirect heat, you can crank up the grill’s heat to about 350 degrees F for the remainder of the cook.

Cook the chuck roast until the internal temperature reaches 205 degrees F. Cook time can take anywhere from 4 to 8 hours, depending on the weight of the meat and the amount of heat put under it.
Monitor the temp with a probe thermometer and use an instant-read thermometer, such as a ThermapenOne, to help double-check for doneness.
It is important to remember that the meat’s internal temperature can increase by 5-10 degrees even after removing it from the grill.

#6 Holding and Resting

Remove the roast from the offset smoker. Leave the beef wrapped tightly in foil or butcher paper, wrap it in a clean towel, and place it inside a cooler to rest for at least 1 hour.

Holding helps tenderize by allowing some carryover cooking which helps melt tough connective tissue. The foil captures the natural au jus for use in a sauce, and holding allows the surface parts that have dried out during cooking to absorb some of the juice.

#7 Slicing the Smoked Chuck Roast

Remove the foil-wrapped chuck roast from the smoker. Carefully unwrap the layers of foil and transfer the meat to a cutting board, tent with foil for about 15 minutes to cool to less than 150 degrees F.

Don’t slice until the last possible minute. The smoked chuck roast dries out quickly once it is cut.
When you are ready, start by cutting off and discarding the twine.
With a sharp chef’s knife, slice the chuck roast thinly against the grain, about ⅛ to ¼-inch thick. For best results, slice only what you are serving, leaving the remaining meat whole.

#8 Serving the Smoked Chuck Roast

Perfectly cooked meat should be moist and juicy. You can serve it sliced on a plate or as a sandwich. If you wish, drizzle some sauce (cheese or BBQ sauce) and serve slices of flat fanned out like a deck of cards surrounded by chunks of burnt ends.

We made sandwiches with the slices for this smoked chuck roast and topped them with a homemade Beer Horseradish Cheddar Cheese Sauce.

smoked chuck roast sandwich with cheese sauce

Recipe Tips

If you have time, wrap the roast in plastic wrap and let it cure in the refrigerator for at least 4 hours or as long as overnight. Smoking the roast immediately is ok, but sitting in the fridge for several hours allows the rub to penetrate the meat.
Knowing the temp in your grill is crucial, so if your grill doesn’t have a temperature gauge, purchase a digital BBQ thermometer. David uses a Thermoworks Smoke™ probe thermometer. It has two channels, one for the meat and one for the smoker, with remote control. David is in love with it. The remote control saves him a lot of worrying about the smoker’s temperature. The alarm sounds each time it falls below the ideal smoking temperature. If you are a serious pit master, we highly recommend it.
Store leftover smoked chuck in an airtight container for up to 3 days or freeze for up to 6 months.

What to Serve With Smoked Chuck Roast

Serve any of your favorite side dishes with this entre. Here are some of our favorites:

We hope you will use this step-by-step guide to smoke a beef chuck roast to enjoy with your family and friends. You’ll love this recipe and especially the cost savings!

Get smokin’!

Print Pin Rate this Recipe

4.92 from 81 votes